Dieses Bild zeigt Federico Pinchetti

Federico Pinchetti

Herr Dipl.-Ing.

Institut für Flugmechanik und Flugregelung

Kontakt

+49 711 685 66671
+49 711 685 66670

Visitenkarte (VCF)

Pfaffenwaldring 27
70569 Stuttgart
Deutschland
Raum: 2.044

Sprechstunde

Nach Vereinbarung.

Fachgebiet

Path generation, High-level guidance, Intelligent flight.

Studium

2006 B.Sc. Aerospace Engineering, University of Pisa
2009 M.Sc. Aerospace Engineering, University of Pisa

  1. F. Pinchetti, O. Pfeifle, S. Notter, und W. Fichter, „Geofencing for Optionally Piloted Aircraft Through Automatic Execution of Smooth Evasive Maneuvers“, in 22nd IFAC Symposium on Automatic Control in Aerospace ACA 2022, B. Subudhi, Hrsg., in 22nd IFAC Symposium on Automatic Control in Aerospace ACA 2022. Elsevier, 2022, S. 25–30. doi: 10.1016/j.ifacol.2023.03.005.
  2. J. Olucak, F. Schimpf, F. Pinchetti, und W. Fichter, „Energy Aware Trajectory Generation for a Novel Cometary Lander Concept“, in AIAA SCITECH 2022 Forum, in AIAA SCITECH 2022 Forum. American Institute of Aeronautics and Astronautics, Jan. 2022. doi: 10.2514/6.2022-0954.
  3. J. Stephan, O. Pfeifle, S. Notter, F. Pinchetti, und W. Fichter, „Precise Tracking of Extended Three-Dimensional Dubins Paths for Fixed-Wing Aircraft“, Journal of guidance, control, and dynamics, Bd. 43, Nr. 12, Art. Nr. 12, 2020, doi: 10.2514/1.G005240.
  4. J. Stephan, S. Notter, O. Pfeifle, F. Pinchetti, und W. Fichter, „Spline Trajectory Planning and Guidance for Fixed-Wing Drones“, in AIAA Scitech 2020 Forum, in AIAA Scitech 2020 Forum. ARC, 2020, S. AIAA 2020-0372. doi: 10.2514/6.2020-0372.
  5. F. Pinchetti, A. Joos, und W. Fichter, „Efficient Continuous Curvature Path Generation with Pseudo-Parameterized Algebraic Splines“, CEAS Aeronautical Journal, Bd. 9, Nr. 3, Art. Nr. 3, Mai 2018, doi: 10.1007/s13272-018-0306-3.
  6. F. Pinchetti, J. Stephan, A. Joos, und W. Fichter, „FlySmart - Automatic Take-Off and Landing of an EASA CS-23 Aircraft“, in Deutscher Luft- und Raumfahrtkongress 2016, in Deutscher Luft- und Raumfahrtkongress 2016. 2016.
  7. R. Küke u. a., „Fly-By-Wire for CS23 Aircraft - Core Technology for General Aviation and RPAS“, in aerodays 2015, in aerodays 2015. London, UK, Okt. 2016.

Master in Aerospace Engineering at University of Pisa, Italy (December 2006 - April 2009)

  • Major Subjects: Chemical and Electrical Space Propulsion, Control, Orbital Mechanics
  • Thesis: "Investigation of Fast Discharge Control Algorithms for High Precision Inertial Sensors"

MSc thesis project at EADS Astrium in Friedrichshafen, Germany (September 2008 - February 2009)

  • Design of an on-board algorithm for the LISA Pathfinder mission.
  • Analysis of the force coupling in different actuation modes and design of a new actuation mode.
  • Improvement of the pre-existing actuation strategies and the system modelling.

Researcher at Technische Universiteit Delft, Netherlands (September 2009 - June 2011)

  • Preliminary study for extended object and wave-front estimation in astronomical systems within a control-system framework.
  • Identification of different research possibilities to achieve the project goals.

Engineer at Astos Solutions in Stuttgart, Germany (July 2011 - December 2011)

  • Support for the LTP Discharge group in EADS Astrium in Friedrichshafen
  • Data and System Simulation analysis

Researcher at the Institute of Flight Mechanics and Control (iFR), Universitaet Stuttgart, Germany (February 2012 - Present).

Sprachen:

Italian and English

Zum Seitenanfang